Customer feedback about the perforated sheet of details

Customer says:

I would like to see if you have access to the following material:
½" Perforated Metal with ¼"-3/8" Holes 4' x 8' Sheet
If not, I would be ok with having two ¼" plates of perforated metal quoted with either ¼"-3/8" holes.
If you have any questions please let me know.

Thank you

Diana

Clement says:

Dear Sirs,

we are interested in:
20 pcs of stainless steel perforated sheet (18 pcs with round hole and 2pcs with rectangle hole) for the parametres please see appended chart and drawing.
Best regards!
Clement

Customer says:

I would like to look for a quotation for the following items
Perforated Sheets
Sheet material: Stainless Steel 316L
Sheet dimensions: 2500mmX1250mm
Quantity: 12
Sheet Thickness: 5mm
Hole diameter: 5mm
Pitch: 7mm

Thank you and Warmest Regards,
Lynne Spinner

Antonio S. says:

Dear Sir,

I am interested with your products PERFORATED SHEET 304.
I would like to know please if you have :
PERFORATED SHEET Stainless Steel with 2m*1m Thickness 8/10 hole diametre 0.8 mm
PERFORATED SHEET Stainless Steel with 2m*1m Thickness 15/10 hole diametre 4 mm
PERFORATED SHEET Stainless Steel with 2m*1m Thickness 30/10 hole diametre 6 mm
PERFORATED SHEET Mild Steel with 2m*1m Thickness 10/10 hole diametre 2mm
PERFORATED SHEET Mild Steel with 2m*1m Thickness 15/10 hole diametre 7mm and 8mm

Thank you
B/R

Saudi Arabia says:

We need to have a sole agency in Saudi Arabia for all your products . Please send your complete product samples and up dated price lists.

We are interested to know if you manufacture perforated panels for indoor and outdoor and perforated metal sheet, aluminium sheet ( round hols metal sheet, honeycore type alum sheet ) sizes 1200x2400 mm using Ceiling and cladding for showrooms and hotels. ( If you have cutting sizes 600x600mm. or 600mm X 1200mm.)

We would like to get the full details of your products.

Appreciating that we will received your favorable response in this regard.

Thanking You and Best Regards,

Purchasing Manager says:

Please quote:
.063 aluminum perforated sheet
Standard sheet size OK
Sufficient to cut 100 pcs 16 X 16 inches
Material 1100-0 or any temper
Perf pattern is ¼ dia holes X 5/16 staggered centers

Purchasing Manager

Customer says:

Good afternoon,

I was wondering if you guys have on hand a product that can meet the following specifications.
I received a quote for this product in Spanish and am not quite sure how to translate all of the specs:

13 feet of AISI-409 perforated sheet metal with a 3 mm diameter, 1.20 mm thick, and 1.2 m X 3.05 m

13 feet of AISI-409 perforate sheet metal with a 3 mm diameter and is 1.20 m X 3.05 M

These are the specs I got in Spanish
PZ 13 LAMINA PERF. 3 MM ESP X 1.20 MT X 3.05 MTS LARGO AISI-409, PERFORACION DEL AGUJERO 3 MM
PZ 13 LAMINA LISA. 3 MM ESP X 1.20 MT X 3.05 MTS LARGO AISI-409, 

Thank you,

Customer says:

Hello
 
I was wondering if I could get some samples of your round hole perforated sheet in various different perforating sizes/thicknesses. We want it to be fairly thin in thickness and the holes to be close together and fairly small. Let me know if this can be done.
 
Thanks,

Customer says:

Dear Sirs,
on your web site we notice also that you can offer zinc cover perforated sheets
Please see enclosed pictures and let us know, if you can offer us zinc cover  quality 120 g/m2  perforated sheets P1, P2, P3, P5 .
Sheet P5, edge 1mm as marked on sketch is not requested  . Can be 2mm or 3mm or any other dimension  .
Quantity : P1-1200pcs., P2-800pcs., P3-200pcs., P5-400 pcs.,
If yes, please let us know your best offer .
IMPORTANT : RED MARK – EDGE 1mm  at  P1, P2 and P5  / NO PUNCHING BURRS   -  MUST BE ASSURED !!!!
IF you can't offer us this material please tell us which company can
Thank you and waiting for your answer . 

Katelye Steetlers

Joseph says:

Hello,

We are working on a project and are interested in using your Slotted Hole Perforated Sheet product as seen in the following picture:
Inline image 1

Specifically, we are interested in using this product:
Inline image 1

We are using this product as a relief air grille, and will need two sized at 14"x18" and three sized at 30"x16".

What is the availability/pricing of these products?

Thank you

Stefan says:

Good afternoon,

I an looking for a single sheet of perforated carbon steel sheet hopefully in the 0.06 thickness with a 0.50 hole staggered pattern. The main thing we need it for the sheet to be is 60x120. Is this something you carry?

Sent from my HTC

Pieter Retief says:

Hello,

I am looking for a 14' x 10' piece of perforated stainless steel sheet metal with a hole size of 0.7mm and an open area percent of 22.7%. If you can help me, please let me know.

Best Regards,

Amir Jafri

Good Afternoon

Can you please quote:

304ss Perforated Sheet 18GA 5/64” staggered

I need a quote on 134feet & separately 268feet, my pcs will be 5”wide x 50”long

Thanks

Customer says

Hi
We are looking for some perforated Galvanized sheets
0.6 mm thick galvanized sheet with 11% open area x 1220 mm wide sheet.
Hole size Ø2.38
Pitch 6.74 mm 
What is your minimum order do you take.
What is the price in (1220 mm) linear metre or metre square 

Kind Regards

Mathias Goris says

Dear Sir,

We are in need of ss perforated sheet

Specifications
Type : perforated sheet
material : SS
hole size : 2 to 3 mm
pitch : 6-10 mm
thickness : 1 to 3 mm

Jonathan Harris says

To whom it may concern,

We obtained your contact from internet and noted that you have been supplying perforated steel sheet material.
Can you company produce such material as below:-

Material type = SPCC (Cold Rolled)
Size : 0.6mmT x 246mmW x 1000mmL
Perforated Spec : 2.0mmDia x 2.5mmPitch x 60 Deg
Qty/year : 100,000 sheet

If you are interested, please provide us your quote base on FOB and CIF Penang Port.

Jonathan Harris says

Dear Sir

You are requested to quote us your best CFR Dammam, KSA port prices for the following items at earliest.

Item no. 1: S.S 304 Perforated Sheet in 1.00mm thick 
                  Size -2500 wide X 5000mm length with hole dia 5mm and triangular pitch 10mm. 
                  QTY: 80 EA                                                                                                                                                          
Item no. 2.  S.S 304 Perforated Sheet in 1.00mm thick
                  Size – 1000 wide X 5000mm length with hole dia 5mm and triangular Pitch 10mm  
                   QTY: 80 EA        

For any information, do contact us.

Customer says

Hi,

I would like a quote for 2 sheets of perforated stainless steel 304 to the following specifications:

16 Gauge
1/8” holes staggered
3.16 spacing
40% open
26.5 x 22.5”

Thanks, I look forward to hearing back from you.

Kind regards,

Customer says

Dear Sir

I would like to make inquiry from your company. I want to get quotation for aluminum perforated sheet.
We would like to get aluminum finishing B-FUE- Stove Enamelled Fluoro Carbon Polymer Paint
 Hole dimension-10mm, pitch-13mm and open area 53.6%.
Sheet Size and quantity- 1500mm x 600mm x 2.5mm thk - 40sheets
                                     1350mm x 600mm x 2.5mm thk- 40 sheets
                                     1200mm x 600mm x 2.5mm thk- 20 sheets

Could you please provide me FOB price?

Maria Nilsson says

Can you please give me a price for the following:

Aluminum perforated sheet
4ft x 8ft  (quantity 2)
14 gauge
Round holes, 3/16” diameter
Staggered spacing, 3/8” centers
23% open area

Lateef Jimoh says

Dear Sales,
I am hoping that you help me with my requirements.
Can you please supply me pricing for perforated sheet to our following specifications.

Sheet material types required:
Type 1. AISI304/2B Stainless Steel .8mm thick
Type 2. AISI316/2b Stainless Steel .8mm thick
Type 3. H34 Aluminium 1.2mm thick

Specifications of sheet as follows:
PERFORATED SHEETS 'Hole punched material'
2.0mm hole size
3.0mm spacing
60 degees staggered pitch

Our usual average monthly shipment requirment is as follows:
200 off x 2000mm x 750mm
200 off x 1500mm x 915mm
200 off x 2000mm x 915mm
200 off x 2000mm x 1220m
200 off x 2400mm x 915mm
200 off x 2400mm x 1220mm

Many thanks

Jacob Lerner says

Dear Mrs/Mr,

The company produces the perforated sheet iron in TÜRKİYE, The production is absolutely in rolls.
The current running size:
Thickness: min. 0.50 mms  max.2.00 mm
Width: min..100 mms  max.1200 mms
Length: in rolls

It is possible to produce in different size, also it is possible for the samples in different size.

 Pls don't hesitate to contact to us.

Best regards.

Arminas says

Price please for galvanised steel perforated sheets
Size 2000mmx1220mmx2mm holes 4mm  5mm pitch
Are the holes galvanised after punching to prevent rusting
Quantity 500 pieces  Delivery time
Price please for sample 984mmx984mm to address as shown

Allan McEvoy

Sales Director